By Patrick | 02 January 2018 | 7341 Comments

PDC Golf 6 - Installation Manual

 
Front Bumper Harness (Black T8 Plug) --- PDC Module (T12 Yellow Plug)
T8/1---------T12/9
T8/2---------T12/5
T8/3---------T12/6
T8/4---------T12/7
T8/5---------T12/8
 T8/6---------T12/10
T8/7---------T12/1
T8/8---------T12/2
PDC Switch Harness
PDC Switch ----PDC Module (T16 Yellow Plug)
T6/2-------T16/13(Green/Blue)
T6/5-------T16/4(Green/White)
CanBus Harness
Orange/ Purple  Cable connect--- T20/16(CAN High)
orange/ black Cable connect--- T20/6(CAN low)
Purple black Cable ----ACC(Power)
Brown Cable ---- GND
T20 is (NO.20 Plug)
CODE :
1.Add To Can (19- Can ) Installation List position number 10 - Park Assist
2.Open block 10 –Park Assist  Coding --> code To Change Code To 108101,If Your Car Has Rear Camera System Change to 308101(AT) 300001 MT
3.IF Not change to A T (100101)  MT (100001) 
4.if can’t working , Please check long code Helper
5.if your original radio can’t support OPS. Please open radio ops support function 
Sensors Hole Size : 18MM





Recently Reviews

Read More

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code