Golf MK7 PLA 2.0 SYSYTEM CODE install 12K

T8/1------T18/2  (Left Front PLA Sensors)
T8/2------T18/11 (Left Front Sensors)
T8/3------T18/3  (Left MID Sensors)
T8/4------T18/12 (Right MID Sensors)
T8/5------T18/4  (Right Front Sensors)
T8/6------T18/13 (Right Front PLA Sensors)
T8/7------T18/10 (GND)            
T8/8------T18/14 (+)
 
CANBUS WIRE:
 
T26/23 -------CANBUS T20/8
T26/24 -------CANBUS T20/18
 
 
Switch wire:
 
T10/1-------(Backlight -)
T10/2-------(Backlight +)
T10/3-------T26/16(PLA Module)
T10/6-------T26/17(PLA Module)
T10/4-------T26/3(PLA Module)
T10/7-------T26/4(PLA Module)
 
 
Front Buzzer:
 
T2/1-------T26/2(PLA Module)
T2/2-------T26/10(PLA Module)
 
 
 
 

REAR PLA Sensors:
 
ORIGINAL PDC Plug :T10/10-----T26/8  (Rear Right PLA Sensors)
ORIGINAL PDC Plug : T10/9 -----T26/19 (Left Right PLA Sensors)
 
Code：
 
19 ----- registered 10
03 ABS ---- LONG CODE HELP --- 26 BYTE ---- Change to "F0" .,, 27 BYTE CHANGE TO "2A"
44--- NO.1 change to 03
10 --- 00 31 06 10 11
17 --- BYTE 5 --- 80 Change to 90