vw audi seat camera install step by step

How did I connect the camera?

In order to work properly, the camera requires the connection of the following wires:

• 2 CAN signal wires (for communication) – Orange+Purple (CAN High) and Orange+Brown (CAN Low)
• 2 video signal wires – Black and Transparent
• 2 power wires – White (+12V) and Brown (GND)

How did I coding the camera?

1. Register the 6C module in the gateway

2. if you have installed parking system please code " 76 or 10 "  . tick rear camera installed . 

3. Module 6C code :  (already do before send out ) 

4. Finally you have to enter the Module 5F

      Adaptation  Search for

Car_Funktion_List_BAP_Gen2_VPS_0x0B    ------  Switch to activated

Car_Funktion_List_BAP_Gen2_VPS_0x0B_msg_bus    ------   choose " terminal 15 " 

5. Rest 5F radio unit .